Phone: | +31 (0)76 596 3820 | |
Fax: | +31 (0)76 596 3833 | |
E-mail: | info@avera.eu |
-
-
-
Magnum AV-1KM CB/6-PIN *PRO VERSION €112,00
HandFree Kit for President CB Radio's using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable, no seperate DC power needed. Fused in the transceiver.
• Easy installation -
RG142 B/U - 1 Meter €10,30
1 meter RG142 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 4,95 mm
• Impedance: 50 Ohm -
RG178 B/U - 1 Meter €2,50
1 meter RG178 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 1,8 mm
• Impedance: 50 Ohm -
RG179 B/U - 1 Meter €2,80
1 meter RG179 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,54 mm
• Impedance: 75 Ohm -
RG316/U - 1 Meter €3,10
1 meter RG316/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,5 mm
• Impedance: 50 Ohm -
Connector N-Female Ecoflex-5 €5,50
Connector N-Female
• Type: Crimp
• Use for: Ecoflex-5, H155, CLF240
• Packing: Bag-1 -
DIN 0027 Version-2 for CRT Micron with Speaker Option €20,14
DIN Mounting Kit (Version 2) with speaker option.
• Radio Hole Dimensions (W x H): 122 x 39 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for: CRT MICRON, CRT 2000H, AnyTone Apollo, Team Expert1. -
-
20 CM Adapter Cable N-Female / SMA-Male €20,95
Adapter Cable RG316, N-Female / SMA-Male
• Packing: Bulk -
-
Magnum Radio DESK MOUNT for 1 RADIO €44,50
DESK MOUNT for 1 Scanner (Receiver) or Portable Transceiver.
• Looks great on your desk or night table
• Will hold just about any portable scanner or radio
• Includes two small round cutouts on either side of the radio and a hole in the back plate, to neatly snake through charger cords and PC programming cables
• On the top a unique slot allows you to clip on scanners with belt clips or slide on scanners
• You can also simply stand any scanner on the bottom lip of the stand.
• Scanners can also be mounted in their carrying case on the stand multiple ways.
• Width 11 cm -
DIN for Motorola GM3188 €19,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 168 x 44 mm
• Two screws are included to fasten the mounting kit to the radio
Use for: Motorola GM3188 and others -
CARRY CASE for Kenwood TK-3701E €41,50
Leather Carry Case with Shoulder Strap
Use for: Kenwood TK-3701D -
DIN 0035 Version-2 for CRT SS9900 €13,50
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 159 x 48 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for: CRT SS9900. -
Magnum 100-Meter RG-8x (MINI-8) €96,00
100 meter RG8x (Mini-8)
• Type: Coax Cable
• Diameter: 6,15 mm
• Impedance: 50 Ohm
• Color: Black
• Packing: Roll -
RG316/U - 100 Meter €149,00
100 meter RG316/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,5 mm
• Impedance: 50 Ohm -
RG179 B/U - 100 Meter €136,00
100 meter RG179 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,54 mm
• Impedance: 75 Ohm -
RG178 B/U - 100 Meter €119,00
100 meter RG178 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 1,8 mm
• Impedance: 50 Ohm -
RG142 B/U - 100 Meter €600,00
100 meter RG142 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 4,95 mm
• Impedance: 50 Ohm -
DIN 0026 for TAYLOR-4 €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 151 x 45 mm
Use for: President Taylor-4. -
DIN 0027 Version-2 for CRT Micron and others €16,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 122 x 39 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for:CRT MICRON, CRT 2000H, AnyTone Apollo, Team Expert1. -
-
Magnum K27RD - 20 cm €17,00
Antenna CB Portable
• Type: Rubber Duck
• Connection: BNC-Male
• Length: 20 cm. -
CABLE 00042 - MIC CABLE 6-WIRES D15 €16,00
Microphone Cord, 6 Wires
• Wires: 5-Conductors and 1-Shield
• Length: Maximum 280 cm
• Diameter Spiral: 20 mm
• Connectors: No
• Packing: Bag -
-
-
-
-
-
DIN 0240 Version 2 for Cobra 19DXIVEU €15,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 117 x 47 mm
Use for: Cobra 19DXIV, 19DXIVEU, Midland 1001, Midland 101 and Midland 109. -
DIN 0041 Version-2 for M-Zero €15,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 111 x 47 mm
Use for: Midland M-ZERO.
-
DIN 0040 Version-2 for AE6110 €15,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 116 x 26 mm
Use for: Albrecht 6110, CRT ONE, President BILL and others
-
DIN 0030 Version 2 €15,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 180 x 50 mm
Use for: President JFK-2, Herbert, James.
-
DIN 0014 Version-2 €15,00
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 172 x 52 mm
Use for: President Johnson-2, TTI TCB900, and more. -
RUBBER DUCK BNC 42.5MC €30,00
Antenna HF Portable, 40 - 45 MHz, Total Length 41 cm, Rubber Duck Type with BNC-Male, Pack includes Adaptor BNC-Male/BNC-Female 90 Degrees Angle.
-
RUBBER DUCK BNC 27.5MC €30,00
Antenna HF Portable, 25 - 30 MHz, Total Length 26 cm, Rubber Duck Type with BNC-Male, Pack includes Adaptor BNC-Male/BNC-Female 90 Degrees Angle.
-
Magnum POWERCORD T3 €9,50
T3 Power Cord, Fuse 3A.
Used by Uniden, President and others in many types of CB Transceivers.
Packing Bulk-1. -
-
-
Coax RG58 500cm + 1x FME-F €6,00
RG58, 500cm, FME/No Connector.
◾ Coax Cable: RG58 Black, 50 Ohm.
◾ Length: 500 cm.
◾ Connectors: FME-Female / No Connector.
◾ Packing: Bulk-1. -
Coax RG58 400cm + 1x UHF-Male €4,01
RG58, 360cm (12ft), PL/No Connector.
◾ Coax Cable: RG58 Black, 50 Ohm.
◾ Length: 360 cm (12 Feet).
◾ Connectors: UHF-Male (PL-259)/ No Connector.
◾ Packing: Bulk-1. -
Magnum 100-Meter RG58C/U MIL-C-17F €76,50
100 Meter RG58 C/U, RF Coaxial Cable
• Standard: MIL-C-17F
• Impedance: 50 Ohm
• Color: BLACK -
Magnum 100-Meter RG213U MIL-C-17F €242,50
100 Meter RG213U, 50 Ohm RF Coaxial Cable , BLACK, MIL-C-17F Standard -
Magnum SCANSTICK 2000 WHIP €26,50
Antenna Scanner Mobile, Whip Only, Length 71,5 cm, Black
Mount 3/8x24 Thread Ferrule.
Used for: Scan Stick 2000 MagMount, Scan Stick 2000 Surface Mount, Scan Stick 2000 BASE -
DIN 78 for Alan78+Multi, M110, M790, TCB770 €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 140 x 37 mm
Use for: Danita 3000, Intek M-110, M-120, Intek M-790 Plus Multi, Midland Alan 78+ Multi, Midland M20, , President Emperor Kenji, CRT MEGAPRO, TTI TCB-660, TCB-770 Multi, TCB-771 -
DIN 70XX *FS €19,90
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 146 x 45 mm / 149 x 45 mm
Use for: Stabo XM70xx, XM80xx, Zodiac M-3000, Maycom EM-27, President Harrison, Allamat 296 -
DIN 5290 *FS €19,90
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 140 x 41 mm
Use for: Albrecht AE5290, AE5280, AE6190, AE6690, Lafayette Ares, Ermes, Zeus, Areo. -
DIN 5090 for AE5090/Magnum 257 ++ €19,90
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 151 x 53 mm
Use for: Albrecht AE5090, AE5800, AE485S, Dragon SS485, Magnum 257 -
DIN 48 for Alan48+Multi, M490, M550, TCB880 €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 156 x 50 mm
Use for: Midland Alan 48+ Multi, Midland Alan 48Excel Multi, Intek M-150, M-490, M-495, M-550, M760, TTI TCB-800, TCB-880 Multi. -
DIN 4200 *FS €19,90
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 130 x33 mm
Use for: Albrecht AE4090, AE4200MC, Stabo Magnum, Lafayette Montana, Lafayette Nebraska -
DIN 100 for Alan 100, 38, 54, 121, Danita 1240 €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 124 x 38 mm
Use for: Midland Alan 38, Alan 54, Alan 199, Alan100, Alan 102, Alan 121, Midland 200, Midland M10, Alan 210, Danita 1240, TTI TCB560, TCB565 (TCB models need small modificatiuon needed), . -
DIN 0200 for Emperor Ninja, Magnum Multi €24,00
DIN Munting Kit
• Radio Hole Dimensions (W x H): 151 x 47 mm
Use for: President Emperor Ninja ASC Multi, Magnum Multi -
DIN 0030 for President JFK-2, Herbert, James €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 180 x 50 mm
Use for: President Herbert , James, JFK-2. -
DIN 0025 for TAYLOR-2 / 3 €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 150 x 45 mm
Use for: President Taylor II Classic, Taylor III ASC Multi. -
DIN 0023 for THOMAS €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 126 x 37 mm
Use for: President Thomas. -
DIN 0021 for HARRY-3/TRUMAN/ANDY/BARRY etc €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 126 x 46 mm
• Use for: President Harry-3 ASC, Harry-3 Classic, TEDDY-2 , Johnny-3 ASC, Tommy ASC, Truman ASC, Andy, Barry, Barry AM/FM, Ronald, Harrison-2 . -
DIN 0020 for HARRY-2 €24,00
-
DIN 0014 for JOHNSON-2, Mc Kinley €24,00
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 172 x 52 mm
Use for: President Johnson-2 ASC Multi, Johnson-2 VOX, Mckinley, Stabo XM5003 -
DIN 0001 - Universal DIN Frame, Metal Color €8,00
Universal DIN Frame, Metal Colour
• Radio Hole Dimensions (W x H): 180 51 mm -
CABLE 0140 - Rotator Cable 8-Wires, 100 Meter €240,00
Roll of 100 Meter Rotator Cable, 8-Wire, Colour GREY.
-
CABLE 0110 - Coax 5M RG58 FME-F/FME-F €21,60
RG58A/U, 500cm, FME-F/FME-F.
◾ Coax Cable: RG58A/U Black, 50 Ohm.
◾ Length: 500 cm.
◾ Connectors: FME-Female / FME-Female.
◾ Packing: Bulk-1. -
CABLE 00041 - MIC CABLE 6-WIRES €16,00
Microphone Cord, 6 Wires
• Wires: 5-Conductors and 1-Shield
• Length: Maximum 300 cm
• Diameter Spiral: 20 mm
• Connectors: No
• Packing: Bulk. -
MOUNT 0104 - Surface Mount for SS1200 €23,50
Surface Mount with UHF-Female for Antenna Whip
• Angular UHF-Female for Coax Connection
Use for: Super Santiago 1200 and others. -