UNIDEN Scanners Accessories

Serial GPS Receiver
• Universal GPS Module Kit
• Includes cables for easy connection to Uniden Scanners
• The BC-SGPS provides a GPS signal/location in time to a Uniden scanner that does not have access to a GPS source (internal or external)
• You can connect this module kit directly to a scanner or CB radio or to a converter unit (included).
• The converter unit connects the GPS unit to scanners with USB, DB9, or other custom jacks.

External Battery Charger
• Includes Large Capacity Battery 5400 mAh
• AC Charger/Adapter

• Use for:  Uniden SDS100 (USA) ,  Uniden SDS100E, SDS100ED , SDS100EDN, SDS100EDNP , 

Antenna Portable for Scanners
• Type: Wideband, Telescopic and Foldable
• Length: 16-65cm.
• Connecto: BNC-Male

Used for: Uniden BCT15X , SDS200E and others.

Programming Cable

Used for: Uniden SDS200E.

SPS, Switching Power Supply, AD-1287, EU/UK Switch over Plug.
◾ Input Connector: AC-EU 2-Pin plus AC-UK 3-Pin.
◾ Input Data: AC 100-240 Volt, 50/60 Hz, 600 mA.
◾ Output Connector: In 2.1 mm, Out 5.5 mm, Length 9.5 mm.
◾ Output Data: DC 13.8 Volt, 700 mA.

Original Repacement, use for Uniden SDS200E , BCT15X .

Leather Carry Case.

Use for: Uniden-Bearcat Types UBC75XLT, UBC125XLT , UBCD160DN , 

Leather Carry Case for UBCD3600XLT, BCD436HP

Hard Leather Carry Case

Use for: Uniden SDS100E

Nylon Carry Case

Use for: Uniden SDS100E

Soft Leather Carry Case.

Use for: Uniden SDS100E.

12VDC Power Cord, Cigarette Lighter Plug with 2A Fuse, Connector 3.5 mm.

Use for: Uniden UBC355CLT

 

Power Cord, 12VDC
• including: Fuse Holder
• Fuse: F1A
• Connector: 3.5 mm

Use for: Uniden UBC355CLT

 

Powercord with built in Voltage Reducer (12VDC to 6VDC) and charging indicator.
• Do NOT use with NiMH batteries higher than 2100mAh else you can blow the fuse

• For use with: Uniden-Bearcat Models BC72XLT, BC92XLT, BC3500XLT, UBC72XLT, UBC92XLT, USC230, USC230E, UBC3500XLT, BC246T, BCD396XT
Packing Bulk-1.

Power Cord 12 Volt DC
• With Cigarette Lighter Plug
• Connctor 5.5 mm.

Use for: Uniden BCT15X, SDS200E and others

 

Power Cord 12Volt DC
• T3-Connector
• 3-Wire
• 2x In-Line Fuse Holder with 2A Fuse.

Use for: Uniden BCT15X, SDS200E and others

To connect scanner to computer with RS232 Slot.

Use for: UBC3500XLT,USC230E,USC230, BCD396XT,BCT15X.

GPS Adapter Cable.
• Allows to connect the BC-GPSK to your BCD325P2 or SDS100(E) scanner's USB port for Location-based Scanning control

Use for:  Uniden BC-GPSK to connect to Uniden SDS100 or SDS100E.

GPS Receiver for Scanner Uniden SDS200 and SDS200E.

USB Cable for Uniden-Bearcat USC230 and USC230E, UBC3500XLT, UBC800XLT, Albrecht AE230, BCD396XT, BCT15X.

Install USB Driver Software BEFORE plugging in the Data Cable.

USB Cable, for Charging NiMH Batteries and Programming by Computer.

Use for: Uniden-Bearcat Types UBC75XLT, UBC125XLT, UBCD3600XLT, SDS100E

Replacement Earphone 3.5 mm for Uniden EZI33XLT.

Switching Power Supply, EU/UK connector
◾ Input Connector: AC-EU 2-Pin / UK 3-Pin
◾ Input Data: AC 100 - 240 Volt, 50/60 Hz, 300 mA
◾ Output Connector: USB Slot
◾ Output Data: DC 5 Volt, 2000 mA

Original Repacement, use for Uniden SDS100E.