Microphones and HeadPhones

Light Duty PTT Foot switch.
• Use the foot switch to control PTT. 
  Combined with a headset, you can freely use both your hands to log a QSO or to control your transceiver.
• FS-01 PTT foot switch is very light and compact.
  Constructed in a metal case, it is easy to travel around the world.
• It has 2 meters cable with 6.3 mm jack. 

Professional Micro/Earphone.
• Clip Microphone with PTT
• Earhook with Earphone, Coil Cord.
• High-impact housing for professional and public safety users.
• IP54 Water resistant
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

Professional Micro/Earphone with Noise Cancelling.
• Clip Microphone with PTT
• Earhook with Earphone, Coil Cord.
• Elegant and strong housing for commercial, professional and public safety users..
• IP54 Water resistant
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

High quality acoustic Micro/Earphone provides absolute audio clearity.
• Clip Microphone with PTT
• Earphone with Acoustic Tube
• Designed for noisy environments 
• Clear Tube allows covert use for security, law enforcement and public safety applications.      
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

Acoustic Micro/Earphone provides absolute audio clearity
• Clip Microphone with PTT
• Earhook with Earphone, Coil Cord.
• Elegant and resistant housing for professional, security and commercial use.
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

High quality acoustic Micro/Earphone provides absolute audio clearity.
• Clip Microphone with PTT
• Earhook with Earphone with Acoustic Tube
• Designed for noisy environments 
• Clear Tube allows covert use for security, law enforcement and public safety applications.      
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

Compact Handheld CB Microphone with Up/Down Buttons
• Type: Electret 
• Connector: P6, President Wiring
• Packing: Blister-1

Compact Handheld CB Microphone
• Type: Electret 
• Connector: P6, President Wiring
• Packing: Blister-1

High Quality Speaker/Microphone 
• Volume: High-Low volume knob 
• Clip: Metal plate clip, rotates 360º
• Housing: High impact housing, for construction sites, factories, police agents, army guards etc.
• Water resistant level: IP55
• Earphone Jack: 3,5 mm  
• Connector: 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)
• Packing: Blister-1

High Quality Speaker/Microphone 
• Volume: High-Low volume knob 
• Clip: Metal plate clip, rotates 360º
• Housing: High impact housing, for construction sites, factories, police agents, army guards etc.
• Water resistant level: IP54
• Earphone Jack: 3,5 mm  
• Connector: 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)
• Packing: Blister-1

Amplified Dynamic Desk Microphone
• Color: BLACK CHROME
• Connector: 4-Pin with Uniden/Cobra/President Wiring

Transparent Eartip
• 4 mm (Female size)

Transparent Eartip
• 5 mm (Male size)

Compact Handheld CB Microphone
• Type: Dynamic
• Connector: P6, President Wiring
• Packing: Blister-1

Use for: Old President models/versions like George, Grant Classic (P6), Herbert (P6), Herbert New, JFK (P6), JFK Classic (P6), Jackson (P6), James, Johnson, Johnson Classic, Taylor New, Valery Classic (P6), Wilson (P6)

Microphone Retriever

Microphone Cord, 6 Wires
• Wires: 5-Conductors and 1-Shield
• Length: Maximum 280 cm
• Diameter Spiral: 20 mm
• Connectors: No
• Packing: Bag

Small Size Speaker Microphone 
• Earphone Jack: 3,5 mm for 8 Ohm Earphone 
• Clip: 360 Degrees Rotating Clip
• Connector: 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)
• Packing: Blister 1

Vox Headset
• Throat Microphone
• Earphone
• PTT-Box with High/Low Switch and PTT/VOX Switch
• Rotating Clip on PTT-Box
• Connector 2-Pin, 2.5 mm/3.5 mm, Right Angle, Kenwood Wiring (Type-K)

Earphone Kit 
• Earphone with Acoustic Tube
• Coiled Cord
• Connector 1-Pin, 2.5 mm Stereo, Kenwood Wiring (Type-K)

For use with Kenwood KMC-17 , KMC-21  , KMC45 Speaker/Microphones

HandFree Kit for CB Radio's using a 6-Pin Mic Connector
• Boom Microphone Connector: Tulip Type

Adapter, Converts 4-Pin Male to 4-Pin Female with Midland Wiring.

Use this adapter when you have a 4-Pin Microphone with Uniden/Cobra Wiring and you want to use that mic on a radio with a 4-Pin Microphone Connector with Midland Wiring.

Original Electret Replacement Microphone
• For Alan types AE6490, AE6491 and others.
• Connector 6-Pin, GDCH Wiring

Adapter, Converts 4-Pin Male to 5-Pin Female with Lincoln/HR2510 Wiring.

Use this adapter when you have a 4-Pin Microphone with Uniden/Cobra Wiring and you want to use that mic on a radio with a 5-Pin Microphone Connector with Lincoln/HR2510 Wiring.

 

Adapter, Converts 4-Pin Male to 5-Pin Female with Cobra Wiring.

Use this adapter when you have a 4-Pin Microphone with Uniden/Cobra Wiring and you want to use that mic on a radio with a 5-Pin Microphone Connector with Cobra Wiring.