SAMLEX Products

Voltage Reducer, Switch Mode, 24VDC/12VDC, 5 Ampere.
• Input Voltage: 20 - 35 VDC
• Output Voltage : 13.8 VDC
• Output Current Max: 5 Ampere Continuous
• Output Current Max: 50 mA SW
• Continuous switched input and output for carkit or other application
Switch Mode DC/DC Converter.

Inverter 24VDC/230VAC 1600 Watt, PURE Sine Wave
• Input Connector: Tubular Type Screw Down Terminals
• Input Data: 21,4 - 33 VDC
• Output Connector: 2 Pcs of AC -EU 2-Pin
• Output Data:  230 VAC

Remote Control

Use for: Samlex SWI1600W-24V, SWI1600W-12V, SWI2100W-24V, SWI2100W-12V and SWI3000W-24V,  SWI3000W-12V.

Microphone Box for Servo Control Machinery
• Microphone: Gooseneck Type
• Voltage: 12 Volt DC 
• Connector: 6-Pin, President Wiring

Inverter 12VDC/230VAC 2100 Watt, PURE Sine Wave
• Input Connector: Tubular Type Screw Down Terminals
• Input Data: 10,5 - 16,5 VDC
• Output Connector: 2 Pcs of AC -EU 2-Pin
• Output Data:  230 VAC

Microphone Box for Servo Control Machinery
• Microphone: Gooseneck Type
• Voltage: 24 Volt DC 
• Connector: 6-Pin, President Wiring

DC-DC Converter, 100 Watts, Fully Isolated.
• Input Voltage: 30 - 60 VDC.
• Output Voltage : 24.5 VDC.
• Output Current Max: 4 Ampere Continuous.
Switch Mode DC/DC Converter, Galvanic Isolated.

Remote Control on/off for Samlex Pure Sinus Inverters.

Can be used for models PST-60S-12E, PST-60S-24E, PST-100S-12E, PST-100S-24E, PST-150S-12E, PST-150S-24E, PST-200S-12E, PST-200S-24E.

Power Supply, Switch Mode.
• Input Voltage: 115 - 230 VAC.
• Input: Power Cord with 2-Pin EU/Schuko  
• Output Voltage: 13,8 VDC
• Output Current: 30/35 Ampere
• Output: Terminals with tubular hole

Voltage Reducer, Switch Mode, 24VDC/12VDC, 5 Ampere.
• Input Voltage: 20 - 35 VDC
• Output Voltage : 13.8 VDC
• Output Current Max: 5 Ampere Continuous
Switch Mode DC/DC Converter.

Inverter 48VDC/230VAC 300 Watt, PURE Sine Wave
• Input Connector: Wire Red/Black
• Input Data: 41 - 60 VDC
• Output Connector: 1 Pcs of AC -EU 2-Pin (Schuko)
• Output Data: 230 VAC

Inverter 12VDC/230VAC 400 Watt, PURE Sine Wave
• Input Connector: Tubular Type Screw Down Terminals
• Input Data:10,5 to 16,5 VDC
• Output Connector: 1 Pcs of AC-EU 2-Pin
• Output Data: 230 VAC

Inverter Pure Sinus, 12VDC to 230VAC, 3000W.

Inverter 24VDC/230VAC 600W, PURE Sine Wave.
Switching Mode Design, High Efficiency, Overload Protection, Low battery Alarm / Shut Down, Low Idle Power Draw of less than 0,5 Ampere.
Input: Tubular type screw down terminals.

Inverter 12VDC/230VAC 1000W, PURE Sine Wave.
Switching Mode Design, High Efficiency, Overload Protection, Low battery Alarm / Shut Down, Low Idle Power Draw of less than 1 Ampere.
Input: Tubular type screw down terminals.

Inverter 12VDC/230VAC 1500W, PURE Sine Wave.
Switching Mode Design, High Efficiency, Overload Protection, Low battery Alarm / Shut Down, Low Idle Power Draw of less than 1 Ampere.
Input: Tubular type screw down terninals.

Inverter 12VDC/230VAC 2000W, PURE Sine Wave.
Switching Mode Design, High Efficiency, Overload Protection, Low battery Alarm / Shut Down, Low Idle Power Draw of less than 1 Ampere.
Input: Tubular type screw down terninals.

Subsitute item(s): Samlex SWI 2100-12.

Remote Control
• Cable Length 450 cm (15 Feet)

Use for: Samlex Models PST-60S-12E, PST-100S-12E, PST-150S-12E, PST-200S-12E, PST-60S-24E, PST-100S-24E, PST-150S-24E, PST-200S-24E., SWI 400-24, SWI  400-12, SWI 700-24, SWI 700-12, SWI 1100-24, SWI  1100-12.

Use for: IVT Models 150S/12E, 200S/12E, 200S/24E.

Battery Backup Module.
This module can be connected to a DC power supply to supply battery back-up power to your equipment in the event of an AC source power failure.
On restoration of AC power the battery back-up module regulates output current and voltage to recharge the batteries.

This unit is a solid-state device which allows uninterrupted DC power in association with a power supply and a battery. The transfer of load between the power supply and the battery is instantaneous. It also keeps the battery charged by providing float charge.

Input Voltage up to 28VDC, Output Voltage 5VDC less than input, Output up to 30A* on load terminals.

 

Voltage Reducer, Switch Mode, 24VDC/12VDC, 8 Ampere.
• Input Voltage: 20 - 32 VDC
• Output Voltage : 13.6 VDC
• Output Current Max: 8 Ampere Continuous
Switch Mode DC/DC Converter.

• Input: 20 - 35 VDC.
• Output: 13.8 VDC.
• Load: 20 Ampere Continuous.
Switch Mode DC/DC Converter.

• Input: 20 - 35 VDC.
• Output: 13.8 VDC.
• Load: 30 Ampere Continuous.
Switch Mode DC/DC Converter.