MAGNUM Accessories
-
Magnum AV-1KM CB/6-PIN *PRO VERSION
HandFree Kit for President CB Radio's using a 6-Pin Mic Connector.
• Great for use in a excavator, crane, shovel, caterpillar or other machine
• Use switch on joy-stick or foot switch to switch from RX to TX
• Connect the 2 wires from any switch to the terminal block
• Handsfree kit is powered from the transceiver through the microphone cable, no seperate DC power needed. Fused in the transceiver.
• Easy installation -
RG142 B/U - 1 Meter
1 meter RG142 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 4,95 mm
• Impedance: 50 Ohm -
RG178 B/U - 1 Meter
1 meter RG178 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 1,8 mm
• Impedance: 50 Ohm -
RG179 B/U - 1 Meter
1 meter RG179 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,54 mm
• Impedance: 75 Ohm -
RG316/U - 1 Meter
1 meter RG316/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,5 mm
• Impedance: 50 Ohm -
Connector N-Female Ecoflex-5
Connector N-Female
• Type: Crimp
• Use for: Ecoflex-5, H155, CLF240
• Packing: Bag-1 -
DIN 0027 Version-2 for CRT Micron with Speaker Option
DIN Mounting Kit (Version 2) with speaker option.
• Radio Hole Dimensions (W x H): 122 x 39 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for: CRT MICRON, CRT 2000H, AnyTone Apollo, Team Expert1. -
20 CM Adapter Cable N-Male / SMA-Male
Adapter Cable RG316, N-Male / SMA-Male
• Packing: Bulk -
20 CM Adapter Cable N-Female / SMA-Male
Adapter Cable RG316, N-Female / SMA-Male
• Packing: Bulk -
Magnum Radio DESK MOUNT for 1 RADIO
DESK MOUNT for 1 Scanner (Receiver) or Portable Transceiver.
• Looks great on your desk or night table
• Will hold just about any portable scanner or radio
• Includes two small round cutouts on either side of the radio and a hole in the back plate, to neatly snake through charger cords and PC programming cables
• On the top a unique slot allows you to clip on scanners with belt clips or slide on scanners
• You can also simply stand any scanner on the bottom lip of the stand.
• Scanners can also be mounted in their carrying case on the stand multiple ways.
• Width 11 cm -
DIN for Motorola GM3188
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 168 x 44 mm
• Two screws are included to fasten the mounting kit to the radio
Use for: Motorola GM3188 and others -
CARRY CASE for Kenwood TK-3701E
Leather Carry Case with Shoulder Strap
Use for: Kenwood TK-3701D -
DIN 0035 Version-2 for CRT SS9900
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 159 x 48 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for: CRT SS9900. -
Magnum 100-Meter RG-8x (MINI-8)
100 meter RG8x (Mini-8)
• Type: Coax Cable
• Diameter: 6,15 mm
• Impedance: 50 Ohm
• Color: Black
• Packing: Roll -
RG316/U - 100 Meter
100 meter RG316/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,5 mm
• Impedance: 50 Ohm -
RG179 B/U - 100 Meter
100 meter RG179 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 2,54 mm
• Impedance: 75 Ohm -
RG178 B/U - 100 Meter
100 meter RG178 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 1,8 mm
• Impedance: 50 Ohm -
RG142 B/U - 100 Meter
100 meter RG142 B/U Cable
• Type: PTFE Coax Cable
• Diameter: 4,95 mm
• Impedance: 50 Ohm -
DIN 0026 for TAYLOR-4
DIN Mounting Kit
• Radio Hole Dimensions (W x H): 151 x 45 mm
Use for: President Taylor-4. -
DIN 0027 Version-2 for CRT Micron and others
DIN Mounting Kit (Version 2)
• Radio Hole Dimensions (W x H): 122 x 39 mm
• Use original radio bracket screws and rubbers to fasten the mounting kit.
Use for:CRT MICRON, CRT 2000H, AnyTone Apollo, Team Expert1. -
Magnum POWERCORD T3 - Fuse 15A
T3 Power Cord
• Fuse: 15 Ampere
• Length: 150 cm
• Packing: Bulk -
Magnum K27RD - 20 cm
Antenna CB Portable
• Type: Rubber Duck
• Connection: BNC-Male
• Length: 20 cm. -
CABLE 00042 - MIC CABLE 6-WIRES D15
Microphone Cord, 6 Wires
• Wires: 5-Conductors and 1-Shield
• Length: Maximum 280 cm
• Diameter Spiral: 20 mm
• Connectors: No
• Packing: Bag